I matched the guitar colours with Kona cottons (it’s always good to have a reason to get the colour card out!), and it goes with Kona Jamaica (blue), Persimmon (orange), Lipstick (red), Pear (green) and Corn Yellow. I decided to use a dark blue binding to match (this was pre-made).

To make this quilt, you can follow my instructions from my first quilt (click here). I cut 7″ squares, but only used a 5 x 5 pattern to make a square quilt this time. It made sense to do that really, especially as I jut used solids for the patchwork. At first I modelled the layout on my first quilt, but I thought that the colours wanted to be a bit more random than that (although Tom has since pointed out to me that it can’t be random if I planned it…!). So this is the randomly-planned layout:

I’ll definitely be using this layout again – I’ve got one of each colour in each row, which is quite satisfying! I stitched the squares together, and then layered up the quilt. After my first two attempts at quilting, I used a different wadding this time – I went for two layers of Simply Cotton (pre-washed before quilting). It’s so much easier to quilt with, and I’m much happier with it overall so will definitely be using this and nothing else in future! Here’s the back – I kept the quilting simple by quilting in the ditch, which means that the pattern still shows through nicely:

I really must learn from my issues with binding though – after my first two quilts, I told myself that I must stitch the front on the machine and then hand stitch the back. Did I do this? Nope! So a few bits are a little untidy…let this be my reminder for the next one!

The post Another patchwork baby quilt appeared first on Hello! Hooray!.

I decided that I’d make a quilted cover, so chose some white fabric for the inside lining – it didn’t really need to be jazzy because no-one will see the inside! For the binding I picked out the pale aqua colour to co-ordinate, and got myself a bias binding-making tool too.

The first thing that I did was measure my machine with its plastic cover on – I measured from the middle of the front to the back, and then the width of the front. I also measured the width and height of the side. When I had the measurements I drew out some templates on craft paper, and to get the shape of the side pieces just right I drew around the side of the cover.

Once the templates were cut out, I then cut out all the pieces of fabric and wadding. I layered up the side pieces first and then pinned them together.

I tried out my quilting guide attachment for the first time today, and it’s brilliant for sewing evenly. I haven’t used it before because I’ve only ever used thicker polyester wadding, and not this thinner cotton wadding. I love the thinner stuff – it’s much easier to sew with! I decided to stitch between every other row after experimenting on some scrap pieces.

Once I had quilted the side pieces, I did the same with the large rectangular piece. This larger piece needed more pins to keep it all together, but I quilted it in the same way.

Once all three pieces were quilted, I pinned them (wrong sides together) before stitching. To make the cover fit a little better, I trimmed the excess afterwards.

The final thing to do was to make and attach the bias binding. The tool was really easy to use and it didn’t take as long as I thought! I also got a binding attachment for my machine, but I could not get the hang of it at all when I practised using it…so to save making a complete mess of my cover, I just pressed the binding in half and pinned and stitched it on.

Ta-dah!

I’m so glad that I chose this fabric – it certainly brightened up a very gloomy day today! Hopefully I’ll be able to sew dust free from now on…

The post Sewing machine cover appeared first on Hello! Hooray!.