Crafty Colour Palette #2: Colour list

Yellow: DMC 3078 / Anchor 292

Orange: DMC 3856 / Anchor 1010

Pink: DMC 3689 / Anchor 49

Purple: DMC 155 / Anchor 1030

Blue: DMC 3811 / Anchor 1060

Mint: DMC 966 / Anchor 206

These colours immediately made me think of the amazing wool felt colours from Cloud Craft. They are definitely the best colours in wool felt! So I got in touch with Nicole from Cloud Craft, and she very kindly sent me the felt for this project. I have such a large collection of embroidery thread that I had all the DMC thread that I needed! If you would like to purchase the thread or the felt in these colours, you can find the links in the project list below.

Crafty Colour Palette #2: Enamel pin holder

When I was thinking about what to make with these felt colours, I knew that I wanted to showcase each shade and I thought that a rainbow effect would be the best way to do this. I have recently started adding to my pin collection and thought it would be great to have something to keep them on. Ta-dah!

Materials

Templates (click here to download – prints on A3 paper)

7″ embroidery hoop

Needle and pins

Sharp fabric scissors

Paper scissors

A pencil

You will also need wool felt in the following colours (with matching thread in brackets):

Buttery (no matching thread needed for this layout, but matches DMC 3078)

Barbie (matches DMC 3858)

Ascot (matches DMC 3689)

Lavender posie (matches DMC 155)

Spearmint (matches DMC 3811)

Pistachio (matches DMC 966)

Step 1

Print out your templates and cut them out using your paper scissors. Lay out the template pieces next to your felt colours, so that you can work out which one goes with which colour.

Step 2

Carefully pin each pattern piece on the colour you want to use, and cut around them using your fabric scissors. Then layer each piece with about 1cm overlap on each side (I went from left to right putting the next piece on top each time). Pin in place. Don’t worry if it doesn’t make a perfect circle, we’ll sort that out shortly!

Step 3

When all the pieces are in place, check the positioning by putting the outer ring of the embroidery hoop over the top. Make sure you can see enough of the outer colours, and adjust the positioning if you need to.

Step 4

When you’re happy with the positioning, you can start to stitch! You only need one stitch for this, which is back stitch. Using the thread colour to match the felt (I started with apricot), thread your needle with 3 strands. Come up through the fabric and make a small stitch, a little way from the edge (see 1 and 2 in the photo below). Then bring your needle up one stitch length away from that (photo 3), before bringing the needle down through the felt at the point where your first stitch ended (photo 4).

Step 5

Repeat all the way along the line, following the line of the felt as a guide. Then do the same with the other colours, matching the thread colours each time.

Step 6

When all of the stitching is complete, turn the felt over so the wrong side is facing up. Put the outer ring of the hoop over it, and draw around the inside with a pencil. Use your fabric scissors to cut out the circle. You might cut some of the knots off at this point, but that’s ok!

Step 7

Once trimmed, place the felt back in the hoop and tighten the screw to secure it. You can leave the back open to see the pretty colours! I thought about adding an extra circle of felt at the back to cover it up, but this makes it too thick to put the pins through. No-one can see the back anyway! You may notice that I’ve painted my hoop to add a bit of extra colour.

Ta-dah!

Your hoop is ready to display all of your lovely pins on! Or just leave it plain if you prefer – that’s the beauty of this project

The pins on my hoop are by the following makers: Sally Sunshine pin by Leslieanne Made It, Fuelled by Tea pin by Samantha Eynon and I Love Tea pin by Kate Garey.

Want one of these enamel pin holder hoops?

If you’re not a crafter but you’d like to get your hands on one of these, fear not! They are now available in my online shop, where you’ll also find a vegan friendly version too. Also, head over to @hellohoorayblog on Instagram for details of a giveaway coming this week! You could win this hoop! Give @cloud.craft a little follow while you’re there too as Nicole has a super inspiring feed!

If you want to get your hands on some pastel highlighters, you can find them here.

Thank you so much to Nicole at Cloud Craft for providing me with the felt for this project. All other materials and tools my own.

Post updated 11th November 2019.

The post Crafty Colour Palette #2 appeared first on Hello! Hooray!.

I wanted to make something special for Donna, because I think it’s brilliant that she and her fellow Owls have taken on these roles, which are all voluntary. So I decided that Brownie badges were a good plan! Felt badges are really easy to make, and you can make the design as simple or as complicated as you can manage. So even if you don’t want to make owl badges you could make any felt badges in this way, so just follow the steps below.

You will need

Pencil and paper
Scissors (a pair for paper and a pair for fabric)
Some wool felt in various colours (I got mine here)
Matching thread
Pins and needle
Little pieces of fabric with a small print, matching the felt
Brooch backs (I got mine on eBay)

Step 1

Draw out your design and then cut out some little templates for each required piece (you might need to trace the design to do so). Pin the templates onto the felt and then carefully cut around each one. Layer them up to check that they are all the right size.

As I was making my owls, I changed my mind about the design – I cut body-sized pieces of fabric here instead of doing the separate scalloped pieces of felt that I had originally thought about. Don’t be afraid to change your design as you make, as I do it all the time!

Step 2

Next, I started stitching the pieces together. You might need to change thread a few times here, depending on how many colours you’ve used! I started with the beak because that was the smallest piece to get in the right place. I also stitched the head pieces on at this stage too.

Step 3

I decided that I wanted my owls to be on a background, because I wanted to stitch the pack name on each one. So at this point I cut out two oval-ish shapes of felt and then began to stitch the owl to one side of the badge.

As I got to the sides, I attached the wings at the same time. I obviously got carried away at this point, because I didn’t take any photos!

Step 4

I worked out where the lettering needed to be, and then marked it on with a fabric marker (ideally I should have used my dissolvable one, but I used a very fine quilt marker instead). Then I stitched over the letters using splitstitch, but you could use whatever you feel comfortable doing.

Step 5

The next step is to attach the brooch back to the other oval-ish piece of felt. Try to get it as central as possible!

Step 6

The final step is to attach the front and back of the badge, using a small running stitch.

Ta-dah! The badge is ready to wear. I also made a badge each for Snowy Owl and Tawny Owl too – I picked backing colours that would all work together. I really hope that the ladies like them, and wish them the best of luck running their new pack!

Post updated 23rd September 2024.

The post Brownie badges appeared first on Hello! Hooray!.

This year, me and Tom decided that we’d make each other a Christmas present with a budget of £10. I’ve been meaning to get around to making Christmas stockings, and this seemed like the perfect opportunity! I found a lovely template in issue 33 of Mollie Makes magazine – it is originally a template for a quilted stocking, but I wanted to make a felt one. I’ve seen lots of templates with funny shaped feet, so I was pleased to find it! I bought this lovely wool felt from Wool Felt Company (the shades are Christmas red and dark green) and I already had the other trimmings.

The first step is to pin and cut out the stocking pieces – I folded the felt in half and cut the two pieces together to make sure they are the same. I added 14cm length to the top of the template.

Then I measured the holly fabric by laying the felt over the top and cutting around it – I did this by eye but took measurements afterwards! You’ll need two 21.5 x 10.5cm pieces, pinned to the top with a small hem.

Next, I cut two pieces of gold ric rac and stitched them over the join between the fabric and felt. (If you’re wondering about when to stitch the rest of the fabric, don’t worry – that will be done shortly!) I also stitched a felt ‘T’ (for Tom) on the front piece of felt.

The next step was to machine stitch along the tops of the two stocking pieces. Then I cut a length of ribbon and put it between the two stocking pieces before pinning the whole thing together. The last step was to machine stitch around the sides of the stocking.

I’m so pleased with how it has turned out – hopefully Tom will love it too Merry Christmas!

The post The handmade Christmas gift challenge appeared first on Hello! Hooray!.